Pendapat Nenek ini mungkin ada benarnya, tapi salahnya apa ya ?? :)

Pemenang Nobel: Internet Bodohkan Manusia

Fino Yurio Kristo - detikinet

Dorris Lessing (techcrunch)

Jakarta - Manfaat internet diamini orang banyak. Namun Doris Lessing (88 tahun), pemenang Nobel Sastra 2007 rupanya tak terlalu terkesima dengan kilauan kemajuan teknologi ini. Menurutnya, internet telah menggiring manusia ke dalam 'kekosongan' dan membuat orang tak tahu apa-apa alias bodoh.

"Telah umum di kalangan anak muda yang meski bertahun-tahun menempuh pendidikan namun tak tahu apa-apa mengenai dunia, tidak membaca apapun dan hanya tahu beberapa hal, misalnya komputer," ungkap Doris dalam pidatonya seperti dikutip detikINET dari Sidney Morning Herald, Selasa (11/12/2007).

Dikatakannya bahwa di negara berkembang macam Zimbabwe, anak-anak senang dengan buku namun di negara maju seperti Inggris, para guru justru prihatin karena sebagian pelajar tak mau membaca dan perpustakaan kekurangan pengunjung. Doris pun menyalahkan internet sebagai penyebab semua ini.

Selain itu, Doris yang asal Inggris ini juga menyatakan pendapatnya tentang aktivitas blogging. Ia mengungkapkan bahwa untuk menulis dengan baik, misalnya menulis karya sastra, orang harus akrab dengan perpustakaan dan bukannya dengan blog.

Meski di lain pihak juga mengakui manfaat internet, penemuan teknologi ini disebutnya membuat orang jadi malas mencari informasi sendiri. Hal ini karena menurut Doris, semua hal telah ada di internet.

Pernyataan senada, sebelumnya juga pernah disuarakan penyanyi Inggris Elton John. Kala itu penyanyi gay ini mengaku sangat membenci internet karena dianggap telah merusak kreativitas orang-orang.

http://www.detikinet.com/index.php/detik.read/tahun/2007/bulan/12/tgl/11/time/142211/idnews/865359/idkanal/398

i--S--E--N--g

Pertama:
Terdapat 9 Buah Apel dengan bentuk dan ukuran yang sama, Namun ketika ditimbang menggunakan neraca terdapat 1 buah yang paling berat[8 buah sama berat dan 1 buah yang terberat], berapa kali timbang-kah untuk mengetahui mana apel yang terberat ?

Katanya sih dengan 2 kali timbang, pasti berhasil nemukan yang terberat


kedua:
1 Diketahui X=Y ;
2. Kalikan kedua sisi dengan "X" >>> X^2=XY ;
3. Kurangkan "Y^2" dari kedua sisi >>> X^2-Y^2=XY-Y^2 ;
4. Uraikan masing-masing sisi >>> (X+Y)(X-Y)=Y(X-Y) ;
5. Buang "X-Y" >>> X+Y=Y ;
6. Gantikan "X" dengan "Y", menurut persamaan "1" >>> 2Y=Y ;
7. Bagi masing-masing sisi dengan "Y" >>> 2=1 ??;

Jika X=Y, Kalau Ayam=Kucing, Jadi Kumaha nyak...

mp3

on irc.nullus.net -j indomp3

on
/s irc.theoneserv.net 6667 -j theone

coz im pelupa

baru aja gue inget,command ini, sometime i use it to chatt,to verify my password

########################
//nickserv identify $?*
########################

u need this command

you need this this command if u found error on mysql:

service mysqld start

#######################################################
ERROR 2002: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
#######################################################

squid config

# NETWORK OPTIONS
http_port 3128

# OPTIONS WHICH AFFECT THE CACHE SIZE
cache_mem 16 MB

# LOGFILE PATHNAMES & CACHE DIRECTORIES
cache_dir ufs /var/spool/squid 100 16 256

# ACCESS CONTROLS

# http_access deny all
http_access allow all[ini tambahan]


##############################
/usr/sbin/squid -z
/etc/rc.d/init.d/squid start
#############################

#####################################################################################
if u see this :

FATAL: Could not determine fully qualified hostname. Please set 'visible_hostname'

Squid Cache (Version 2.5.STABLE1): Terminated abnormally.
CPU Usage: 0.150 seconds = 0.110 user + 0.040 sys
Maximum Resident Size: 0 KB
Page faults with physical i/o: 379
Aborted
#####################################################################################

solution : check the visible_hostname

note

on snmpd.conf:

###############################
Syslocation kodjoe
syscontact aat@sipanggaron.com
rocommunity lappet
###############################

save it :

and from shell restart snpd,

[root@sahat root]# /etc/init.d/snmpd restart
-
cfgmaker lappet@192.168.0.1 > mrtg.cfg(set the directory)
edit mrtg.cfg
and change WorkDir
to a place where you want the graphs saved
make sure the user running MRTG has write access to that directory

run this: mrtg mrtg.cfg

next step is optional:

[root@sahat root]# mrtg /etc/mrtg/mrtg.cfg (if u take the mrtg.cfg on this)
[root@sahat root]# cd /var/www/html/mrtg
[root@sahat mrtg]# mv index.html index.html.old
[root@sahat mrtg]# ln -s r1.html index.html

the originalof snmp

###############################################################################
#
# snmpd.conf:
# An example configuration file for configuring the ucd-snmp snmpd agent.
#
###############################################################################
#
# This file is intended to only be as a starting point. Many more
# configuration directives exist than are mentioned in this file. For
# full details, see the snmpd.conf(5) manual page.
#
# All lines beginning with a '#' are comments and are intended for you
# to read. All other lines are configuration commands for the agent.

###############################################################################
# Access Control
###############################################################################

# As shipped, the snmpd demon will only respond to queries on the
# system mib group until this file is replaced or modified for
# security purposes. Examples are shown below about how to increase the
# level of access.

# By far, the most common question I get about the agent is "why won't
# it work?", when really it should be "how do I configure the agent to
# allow me to access it?"
#
# By default, the agent responds to the "public" community for read
# only access, if run out of the box without any configuration file in
# place. The following examples show you other ways of configuring
# the agent so that you can change the community names, and give
# yourself write access to the mib tree as well.
#
# For more information, read the FAQ as well as the snmpd.conf(5)
# manual page.

####
# First, map the community name "public" into a "security name"

# sec.name source community
com2sec notConfigUser default public

####
# Second, map the security name into a group name:

# groupName securityModel securityName
group notConfigGroup v1 notConfigUser
group notConfigGroup v2c notConfigUser

####
# Third, create a view for us to let the group have rights to:

# Make at least snmpwalk -v 1 localhost -c public system fast again.
# name incl/excl subtree mask(optional)
view systemview included .1.3.6.1.2.1.1
view systemview included .1.3.6.1.2.1.25.1.1

####
# Finally, grant the group read-only access to the systemview view.

# group context sec.model sec.level prefix read write notif
access notConfigGroup "" any noauth exact systemview none none

# -----------------------------------------------------------------------------

# Here is a commented out example configuration that allows less
# restrictive access.

# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.

## sec.name source community
#com2sec local localhost COMMUNITY
#com2sec mynetwork NETWORK/24 COMMUNITY

## group.name sec.model sec.name
#group MyRWGroup any local
#group MyROGroup any mynetwork
#
#group MyRWGroup any otherv3user
#...

## incl/excl subtree mask
#view all included .1 80

## -or just the mib2 tree-

#view mib2 included .iso.org.dod.internet.mgmt.mib-2 fc


## context sec.model sec.level prefix read write notif
#access MyROGroup "" any noauth 0 all none none
#access MyRWGroup "" any noauth 0 all all all

###############################################################################
# System contact information
#

# It is also possible to set the sysContact and sysLocation system
# variables through the snmpd.conf file:

syslocation Unknown (edit /etc/snmp/snmpd.conf)
syscontact Root (configure /etc/snmp/snmp.local.conf)

# Example output of snmpwalk:
# % snmpwalk -v 1 localhost -c public system
# system.sysDescr.0 = "SunOS name sun4c"
# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
# system.sysContact.0 = "Me "
# system.sysName.0 = "name"
# system.sysLocation.0 = "Right here, right now."
# system.sysServices.0 = 72


# -----------------------------------------------------------------------------


###############################################################################
# Process checks.
#
# The following are examples of how to use the agent to check for
# processes running on the host. The syntax looks something like:
#
# proc NAME [MAX=0] [MIN=0]
#
# NAME: the name of the process to check for. It must match
# exactly (ie, http will not find httpd processes).
# MAX: the maximum number allowed to be running. Defaults to 0.
# MIN: the minimum number to be running. Defaults to 0.

#
# Examples (commented out by default):
#

# Make sure mountd is running
#proc mountd

# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
#proc ntalkd 4

# Make sure at least one sendmail, but less than or equal to 10 are running.
#proc sendmail 10 1

# A snmpwalk of the process mib tree would look something like this:
#
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.2
# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
#
# Note that the errorFlag for mountd is set to 1 because one is not
# running (in this case an rpc.mountd is, but thats not good enough),
# and the ErrMessage tells you what's wrong. The configuration
# imposed in the snmpd.conf file is also shown.
#
# Special Case: When the min and max numbers are both 0, it assumes
# you want a max of infinity and a min of 1.
#


# -----------------------------------------------------------------------------


###############################################################################
# Executables/scripts
#

#
# You can also have programs run by the agent that return a single
# line of output and an exit code. Here are two examples.
#
# exec NAME PROGRAM [ARGS ...]
#
# NAME: A generic name.
# PROGRAM: The program to run. Include the path!
# ARGS: optional arguments to be passed to the program

# a simple hello world

#exec echotest /bin/echo hello world

# Run a shell script containing:
#
# #!/bin/sh
# echo hello world
# echo hi there
# exit 35
#
# Note: this has been specifically commented out to prevent
# accidental security holes due to someone else on your system writing
# a /tmp/shtest before you do. Uncomment to use it.
#
#exec shelltest /bin/sh /tmp/shtest

# Then,
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.8
# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0

# Note that the second line of the /tmp/shtest shell script is cut
# off. Also note that the exit status of 35 was returned.

# -----------------------------------------------------------------------------


###############################################################################
# disk checks
#

# The agent can check the amount of available disk space, and make
# sure it is above a set limit.

# disk PATH [MIN=100000]
#
# PATH: mount path to the disk in question.
# MIN: Disks with space below this value will have the Mib's errorFlag set.
# Default value = 100000.

# Check the / partition and make sure it contains at least 10 megs.

#disk / 10000

# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.9
# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F
# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""

# -----------------------------------------------------------------------------


###############################################################################
# load average checks
#

# load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0]
#
# 1MAX: If the 1 minute load average is above this limit at query
# time, the errorFlag will be set.
# 5MAX: Similar, but for 5 min average.
# 15MAX: Similar, but for 15 min average.

# Check for loads:
#load 12 14 14

# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.10
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""

# -----------------------------------------------------------------------------


###############################################################################
# Extensible sections.
#

# This alleviates the multiple line output problem found in the
# previous executable mib by placing each mib in its own mib table:

# Run a shell script containing:
#
# #!/bin/sh
# echo hello world
# echo hi there
# exit 35
#
# Note: this has been specifically commented out to prevent
# accidental security holes due to someone else on your system writing
# a /tmp/shtest before you do. Uncomment to use it.
#
# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest

# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.50
# enterprises.ucdavis.50.1.1 = 1
# enterprises.ucdavis.50.2.1 = "shelltest"
# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
# enterprises.ucdavis.50.100.1 = 35
# enterprises.ucdavis.50.101.1 = "hello world."
# enterprises.ucdavis.50.101.2 = "hi there."
# enterprises.ucdavis.50.102.1 = 0

# Now the Output has grown to two lines, and we can see the 'hi
# there.' output as the second line from our shell script.
#
# Note that you must alter the mib.txt file to be correct if you want
# the .50.* outputs above to change to reasonable text descriptions.

# Other ideas:
#
# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq

# -----------------------------------------------------------------------------


###############################################################################
# Pass through control.
#

# Usage:
# pass MIBOID EXEC-COMMAND
#
# This will pass total control of the mib underneath the MIBOID
# portion of the mib to the EXEC-COMMAND.
#
# Note: You'll have to change the path of the passtest script to your
# source directory or install it in the given location.
#
# Example: (see the script for details)
# (commented out here since it requires that you place the
# script in the right location. (its not installed by default))

# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/local/passtest

# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.255
# enterprises.ucdavis.255.1 = "life the universe and everything"
# enterprises.ucdavis.255.2.1 = 42
# enterprises.ucdavis.255.2.2 = OID: 42.42.42
# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
# enterprises.ucdavis.255.5 = 42
# enterprises.ucdavis.255.6 = Gauge: 42
#
# % snmpget -v 1 localhost public .1.3.6.1.4.1.2021.255.5
# enterprises.ucdavis.255.5 = 42
#
# % snmpset -v 1 localhost public .1.3.6.1.4.1.2021.255.1 s "New string"
# enterprises.ucdavis.255.1 = "New string"
#

# For specific usage information, see the man/snmpd.conf.5 manual page
# as well as the local/passtest script used in the above example.

# Added for support of bcm5820 cards.
pass .1.3.6.1.4.1.4413.4.1 /usr/bin/ucd5820stat

###############################################################################
# Further Information
#
# See the snmpd.conf manual page, and the output of "snmpd -H".
===============================================================================

ketikkan:
[root@sahat root]#vi /etc/snmp/snmpd.conf,
dan tambahkan baris-baris berikut:
com2sec local localhost rahasia
com2sec mynetwork ALAMAT_IP_ANDA rahasia
group MyRWGroup v1 local
group MyRWGroup v2c local
group MyRWGroup usm local
group MyROGroup v1 mynetwork
group MyROGroup v2c mynetwork
group MyROGroup usm mynetwork

view all included .1 80
access MyROGroup "" any noauth exact all none none
access MyRWGroup "" any noauth exact all all none

syslocation Bandung
syscontact sahat


Kemudian jalankan service snmp daemon:


[root@sahat root]# /etc/init.d/snmpd start
Starting snmpd: [ OK ]
[root@sahat root]# snmpwalk localhost rahasia system

Langkah terakhir adalah menyiapkan MRTG, file konfigurasinya berada di /etc/mrtg/mrtg.cfg. Beberapa opsi yang harus dirubah, dicontohkan sebagai berikut.
WorkDir: /var/www/html/mrtg
Target[r1]: 2:rahasia@ALAMAT_IP_ANDA
MaxBytes[r1]: 1250000
Title[r1]: Analisis Lalu Lintas
PageTop[r1]: Statistika untuk www.sahat.com


Pastikan juga dalam file /etc/crontab ada entri seperti baris berikut :
0-59/5 * * * * root /usr/bin/mrtg /etc/mrtg/mrtg.cfg


Setelah itu tinggal menjalankan perintah:


[root@sahat root]# mrtg /etc/mrtg/mrtg.cfg
[root@sahat root]# cd /var/www/html/mrtg
[root@sahat mrtg]# mv index.html index.html.old
[root@sahat mrtg]# ln -s r1.html index.html

Jangan lupa jalankan service
- httpd didapat dari paket apache
- crontd didapat dari paket vixie cron contabs

note on the midnight

How to start the Apache Web Server in Redhat 9.0
Redhat 9 comes with Apache webserver. This is installed by default, but does not run at boot up.

To run Apache type the following at the command prompt:

/etc/init.d/httpd start

To test it type:

/etc/init.d/httpd status

If apache is running you should see something like the following:

httpd (pid 1844 1843 1842 1841 1840 1839 1838 1837 1828) is running...

There are several ways to run Apache at bootup, and here is one of the simple ones.
To run Apache at bootup type:

vi /etc/rc.local

This will open rc.local in the text editor "vi". Arrow down to the bottom of the text (there may not be any yet, in which case it will be the first line) and add:

/etc/init.d/httpd start

Then type :w and enter it (writes the file, i.e. saves it)
Followed by :q and enter it (quits the vi text editor)



How to add a new user in Redhat 9.0
To add a user and set up the directories you want that user to have, use the useradd command. By default, this will add a user and create a home dircetory for that user, which will be located in /home.

EXAMPLE: /usr/sbin/useradd yourname will create the user yourname, and make the directory /home/yourname

Set the password for the new user by running passwd. This will give the user a password and activate the account.

EXAMPLE: /usr/bin/passwd yourname. You will be prompted twice for a password.

NOTE: If you want useradd to create more default directories than just /home/newuser, you can add them to /etc/skel. Anything you add to this directory will be created when you add a new user.

EXAMPLE: mkdir /etc/skel/www will add a directory called www to the skel dir. Now whenever you run useradd to create a new user, it will also create a www directory in the new users home directory.

There are also some options for useradd you can add if you wish, such as changing where the users home directory will be, or which skeleton directory to use. For more information on useradd options go to www.linuxdocs.org

cause not automatically

cause i dont set my mysql automatically, i must type this command on shell, hehe..hehe....:

###############################################################
"Start MySQL server"# /etc/rc.d/init.d/mysqld start
"Stop MySQL:" # /etc/rc.d/init.d/mysqld stop
"Restart MySQL:" # /etc/rc.d/init.d/mysqld restart
###############################################################

E__R__R__O__R

I found this error whe i start my mrtg:

#####################################################################################
Starting MRTG: -----------------------------------------------------------------------
ERROR: Mrtg will most likely not work propperly when the environment
variable LANG is set to UTF-8. Please run mrtg in an environment
where this is not the case:

env LANG=C /usr/bin/mrtg ...
-----------------------------------------------------------------------
#####################################################################################


the simply solution is:

#####################################################################################
LANG="en_US.UTF-8"
SUPPORTED="en_US.UTF-8:en_US:en"
SYSFONT="latarcyrheb-sun16"

#####################################################################################
simply edit the /etc/sysconfig/i18n file and change LANG="en_US.UTF-8" to LANG="en_US". Now you should be able to run the command "mrtg" and receive this output:

or you can just type LANG="en_US" in shell and that fixes it too.


its so easy man, but im so long on my BT
M E R D E K A

setting psybnc

THIS, wRITTING JUST try to connect our IRC to dalnet,
coz, we have problem with TROJAN(sirojan)
its very easy to do that :
ngedonlot dolo gitu loh :
#wget http://www.psybnc.info/download/beta/psyBNC-2.3.2-7.tar.gz
then..ekstrak ...it
#tar -zxvf "nama-file"
then
#cd /psybnc
baca README
#make
#vi psybnc.conf
The port must be an uncommon port (Meaning a port other than 6667-7000)
############################################
PSYBNC.SYSTEM.PORT1=31337

PSYBNC.SYSTEM.HOST1=*

PSYBNC.HOSTALLOWS.ENTRY0=*;*
###########################################
dengan menggunakan port 31337


"setelah setting port
#./psybnc

u would see like this :
################################################
.-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-.
,----.,----.,-. ,-.,---.,--. ,-.,----.
| O || ,-' \ \/ / | o || \| || ,--'
| _/ _\ \ \ / | o< | |\ || |__ |_| |____/ |__| |___||_| \_| \___| Version 2.3.2-7 (c) 1999-2003 the most psychoid and the cool lam3rz Group IRCnet `-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=tCl=-' ################################################ on mirc : /s "no_IP":port /ADDUSER lappet:lappet >>>> buat user_baru:lappet 'n pass:lappet
res beres berebes PSY siap pakai.............................MERDEKA...!!!!!

router on floppy size

membuat router ukuran 1 disket, ternyata mudah banget, with this tutor :

http://freesco.jason-wong.org/

http://zelow.no./floppyfw/download.html

http://www.netfilter.org/

http://yolinux.com/

setting router + midendt on koedjo.net

refrensi tulisan bulan juni,
getting midentd on :
wget http://panorama.sth.ac.at/midentd/files/midentd-current.tar.gz

alur :
tar -zxvf midentd-current.tar.gz
./install.sh

setting :
vi /etc/xinetd.d/midentd

service ident
{
disable = no
id = midentd
socket_type = stream
protocol = tcp
wait = no
user = nobody
nice = 0
server = /usr/local/sbin/midentd
}


/usr/local/sbin/midentd -u nobody -f


Setting Pembagian bandwith dengan artikel-artikel yang ada di internet, i dont know what should i use, mana yg lebih bagus ya, pake HTB atau tcng.

tcng

htb

howto TC-TCNG-HTB

sabtu pagi

sabtu pagi, setting ip baru, buat tib.net, dalam satu card interface buat 2 ip, Puji Tuhan semua beralan lancar, thx God:
urutannya :
[root@love /]# ifconfig eth1 202.138.229.121 netmask 255.255.255.252 up
[root@love /]# ifconfig eth1:0 192.168.0.1 netmask 255.255.255.0 up
[root@love /]# vi /etc/sysconfig/network-scripts/ifcfg-eth1:0
[root@love /]# service iptables stop
[root@love /]# /sbin/iptables -t nat -A POSTROUTING -o eth0 -s 192.168.0.0/24 -j SNAT --to-source 202.138.229.122
>
>
sampe beres...
note:
Postrouting bukan ke eth1 bukan
[root@love /]# /sbin/iptables -t nat -A POSTROUTING -o eth1 -s 192.168.0.0/24 -j SNAT --to-source 202.138.229.122
>
>
sabtu malam, tiba2 gue harus take over, acara persekutuan, cause bayu have the other bussiness, CMN, hmm.... gue juga gelabakan, sempat binun, mo bagiin apa ya , yg jelas, trus ada yg bagi berkat di PD, katanya buat temen-temen jadi blingsatan, atau tertuduh, atau mungkin bertanya ada apa ya ?

information

information
udah hari yg ke- 3, coba tuk persiapkan tulisan tentang JAVA (Mencoba tuk beda), tapi kayanya blon ada progress yg cukup berarti (banyak tidur 3 hari ini), ternyata java.sun.comsangat bermurah hati berikan dokumentasi j2ee.1.4 , thanks .. dapat inspirasi lagi.


Merdeka......!!!!